HSAIRPO CM3F2E-PoE Media Converter 3FO 2ETH 10/100Mbps PoE The CM3F2E-PoE is a 10/100Mbps adaptive fiber switch. It has 2 10/100Mbps Ethernet ports and 3 155Mbps fiber ports. There are also many other advantages such as isolation protection, good data security, working stability and easy maintenance. Key Features : - 3 Fiber (AAB) 2 Ethernet - Support the switch between 100Base-FX and 100Base-TX - 3*155Mbps full duplex fiber ports, 2*10/100Mbps adaptive Ethernet ports - Support 10/100Mbps rate, support MDI/MDI-X adaptive, support full/half duplex adaptive - Each port has the complete LED Indicator light for installation, commissioning and maintenance - Support single mode single fiber,single mode dual fiber, multi-mode dual fiber and SFP slot - Support IEEE802.1d Spanning tree - Support IEEE802.1p traffic prioritization protocol - Support high performance Qos function on each port - Support broadcast storm protection - Support max forwarding packet length 2048 bytes option - Support IEEE 802.3x flow control and back pressure control - Require no configuration and will instantly operate as soon as you power it up - Adopt low power consumption Realtek chip, only 2.5W in full load condition - Support non-standard POE function - Built-in IC protection from electrostatic discharge during thunder stroke Ethernet Port - Connector: RJ45 - Data Rate: 10/100Mbps - UTP Type: UTP-5E or higher level Fiber Port - Connector: SC/FC/ST slot - Data Rate: 155Mbps - Optical wavelength: 850nm/1310nm/1490nm/1550nm - Fiber(Single mode): 8/125,8.7/125,9/125,10/125 Performance - Processing Type: direct forwarding - MAC Table Size: 2K - Buffer Space: 2048 bit - Back bandwidth: 1G - Maximum Packet Length: 2048 bytes - Time Delay:<150μs - TX Power: -14~-8dBm - Sensitivity: -32dBm - Link Budget: 18dBm Power - Input Voltage: AC100V~240V 50/60Hz - Connector: DC Socket - Power Supply: 12v - Power Consumption: 1.8W~2.5W Environment - Storage Temperature: -40~70?