WIRELESS HEADSET 5STAR 5S RWH100

Detail WIRELESS HEADSET 5STAR 5S RWH100

- Power Switch
This switch can charge the battery either on or off.
The indicator light is red/blue side luminous LED, the blue light blinks slowly when the code matching fails, and the blue light is steady on when the code matching succeeds.
The red light is the microphone mute status indicator. When the microphone is mute, the red light is steady on, and when the microphone is normal, the red light is off (when the battery is low, the red light will be used as the battery indicator and blink to indicate the low power status).
- Mass production software TX will roll code to burn different UID, the current headset project needs two-way transmission, this mode does not support one drag more.
- MIC (microphone bar)
This microphone is a microphone rod,
- Power on and code indicator light
The red light is on when charging, and the red light goes out when charging
- USB socket
The headset cannot be turned on in charging state, and can be normally turned on again only by unplugging the charging cable.

Feature :
- 2.4g high-speed wireless connection, no-pair code connection, barrier-free transmission distance of about 10M, can penetrate ordinary walls,
- Support the industry's smallest transceiver
- Supports USB1.1 protocol
- High quality stereo finish poor sound quality,
- support WINDOWS98 or above, MAC and ANDROID operating system

- Product technical parameters :
Frequency range:2.402-2.480GHZ
Signal to noise ratio:1000HZ
Channel sound insulation:2MHZ
Sending and receiving distance10M
transmitted power:10dbm
Acceptance sensitivity :-84DBM
Sampling frequency:48KHZ,16BIT
lithium battery:3.7V,1200MA
Transmitter power approx:5V/120mA;
Receiver power approx.:3.7V / 85mA
The charging time:2.5 H
Working hours: 8H
The loudspeaker diameter:?40
The speaker impedance:32
The speaker power:20MW
Horn frequency response:20HZ~20KHZ
The mi diameter:?6.0
The mi sensitivity:-58DB+/-3DB
Frequency response:10~16K

Gambar produk