Silakan Pilih di Varian PRODUK, tidak terima retur jika salah order.
Spesifikasi: - Brand: UGREEN - Product: M.2 M-Key SSD Enclosure - Material: Alimunium Alloy - Speed: 10Gbps NVMe / 5Gbps (NGFF) - Chip: ASM225CM - Tidak Support AHCI - Termasuk kabel DATA 50CM
NVMe: Kabel Type-C to Type-C (Speed 10Gbps) NGFF/SATA: Kabel Type-C to USB-A 3.0 (Speed 5Gbps)
10Gbp SuperSpeed & UASP Supported The USB 3.1 interface incorporates with UASP (USB Attached SCSI Protocol) that enables it to perform a 70% faster read speed and 40% faster write speed than conventional USB 3.1 when used with a UASP-enabled host computer.
Main Features Plug & Play and Hot-Swapping. Easy installation & no driver required. No additional power required. Support all 2230 2242 2260 2280 PCIe NVMe M.2 SSD of M-Key or M+B Key form factor. Support UASP, S.M.A.R.T and TRIM. Constructed with aluminum alloy which is better for heat dissipation, no worry about over-heat. Built with short-circuit, over-current and multi-protection to ensure safety for your SSD and valuable data.
Warm Reminder 1.Not support NGFF SATA SSD. 2. Only support PCIe NVME M-Key M.2 SSD. Not Support PCIe AHCI M.2 SSD or M.2 NGFF SATA SSD. Some SSDs have both AHCI & NVMe or SATA & NVMe editions available. For example, Samsung SM951 SSD. 3. To achieve a 10Gbps data transmission rate, the USB 3.1 interface on your PC should be USB 3.1 Gen 2. Some PCs only come with USB 3.1 Gen1 whose max speed is 5Gbps. 4. It is normal that the aluminum case heating up, for the high-speed NVMe M.2 drives generates much heat while working. 5.If your M.2 SSD is the first use, you should format it before using. Only in this way can SSD be recognized by computers.