Ubiquiti ETH-SP Ethernet Surge Protector Anti Petir UTP LAN Outdoor

Detail Ubiquiti ETH-SP Ethernet Surge Protector Anti Petir UTP LAN Outdoor

Overview Of Ubiquiti ETH-SP Ethernet Surge Protector Anti Petir UTP LAN Outdoor

Kualitas : Ubiquiti Original

ESD Protection for Outdoor High-Speed Networks

Introducing the Ethernet Surge Protector, model ETH-SP, from Ubiquiti Networks. The ETH-SP is a cost-effective solution for protecting outdoor Ethernet devices from damaging electrostatic discharge and surges. Since all Ubiquiti airMAX devices already have robust ESD protection built in, adding the ETH-SP to the installation provides an additional layer of protection to the network.

The ETH-SP is engineered to protect Power-over-Ethernet (PoE) or non-PoE devices with connection speeds of up to 1Gbps. Two passive, surge-protected RJ45 connections provide maximum equipment compatibility.

All Ubiquiti airMAX devices are equipped with ESD protection. However, to protect outdoor devices, and to meet certain local code requirements, installing the ETH-SP is essential.

For example, to guard against costly service calls, and to help your subscriber installations meet code requirements, install two ETH-SPs: one near the CPE, and the other at the entry point to the building. Damaging ESD attacks and surges will be absorbed by the ETH-SPs and safely discharged into the ground.

Specifications:
~ Model ETH-SP
~ Dimensions: 91 x 61 x 32.5mm
~ 2x 10/100/1000 Ethernet Ports
~ ESD/EMP Protection:
Absorbing Transient Current with Response to
Surge Voltage from 100V/s to 1kV/s
~ DC Spark-Over Voltage 90V @ 100V/s
~ Maximum Impulse Spark-over Voltage 700V @ 1kV/s
~ Discharge Current: 5kA (Maximum), 0.5kA (Normal)
~ Maximum Insulation Resistance 1G ohm @ 50V
~ Maximum Capacitance 1.0 pF @ 1 MHz
~ IEEE 802.3af PoE Support Yes
~ Shock and Vibration Certification ETSI300-019-1.4 Standard
~ Operating Temperature -30 to 65C
~ Operating Humidity 10 to 90% Noncondensing

Gambar produk