Tollset repair kaca mika lampu headlight mobil Allplace Permanent Headlamp Restoration Kits Headlight Refurbished

Detail Tollset repair kaca mika lampu headlight mobil Allplace Permanent Headlamp Restoration Kits Headlight Refurbished

Video perkenalan produk Tollset repair kaca mika lampu headlight mobil Allplace Permanent Headlamp Restoration Kits Headlight Refurbished. Sumber: Shopee.

Allplace Permanent Headlamp Restoration Kits Headlight Refurbished
Toollset repair kaca mika lampu headlight mobil Allplace Permanent Headlamp Restoration Kits Headlight Refurbished
1)one bottle repair liquid(800g, 600ml)
2)one atomizing cup
3)power adapter
4)sand paper
5)funnel
6)Griding Base
7)One Aluminium alloy case.
Lamp Renovation Headlight Restoration Kit Headlamp Restoration

1. Clean the surface of the lamp with clean towel, and put 2-3 layers of fine paper on the
periphery of the headlights to prevent the car paint from being wrong polished.
Sandpaper introduction: 150 #-180 # severe cracks and scratches are used (generally mild
yellow or slightly cracked, do not use) 240# Slightly cracked or yellowish to use (slightly cracked
or peeling) 320# slightly yellowing or dealing with the sand paper mark left on 240 # (manual
polishing can be directly used by 320# manual grinding) 500 # mainly deals with the sandpaper
left by 320 #. 800 # mainly deals with the sand paper mark of 500 #. After polishing, it can be
directly used for fumigation repair. If you want to fix it better. You can use 1200 # for a simple
grind, but remember, you can use 1500 # or 2000 # to fine polish the headlights, because the
polishing is too smooth and the brightness is not high enough.
2. There are two main methods for the polishing of headlamps. One is the grinding of the
machine, and the other way is the manual polishing. In this case, we give you a brief introduction
to the manual polishing method. When grinding, must use water, rub water while polishing,
change the grinding direction for each set of sandpaper! (for example: 180 sandpaper transverse
grinding, after polishing and finishing, 240 # sandpaper will be polished vertically, except on the
edge, but the edge must be carefully sanded! And so on, the final sandpaper can be 800 #
sandpaper, also can use 1200 # sandpaper, with a paper towel dry the water on the surface of the
lamp and the watermark, this time the surface of the headlight is even and smooth, color white,
the color is the same, no coarse sand paper printing no interface, this time you can wait for the
headlight to be repaired!)

Gambar produk