Threebond 1207C Loquid Gasket

Detail Threebond 1207C Loquid Gasket

Three Bond 1207C is a silicone rubber based, one component type red colour
liquid gasket. It sets automatically at room temperature when reacting with the
moisture in the air. No hardeners, activators or heat are required.
Three Bond 1207C increases its strength in the course of hardening. The
resultant rubber-like solids resist both heat and cold; maintain stability and
original status under a wide range of temperature: from -50C to +230C.

Features
Highly resistant to heat, cold, weather, and has excellent electric insulation.
It is solvent-less so little shrinkage occurs.
Suitable for sealing comparatively large clearances.

Directions for Use!
- Three Bond 1207C begins hardening in 40 minutes at 25C after application.
- Cut the attached nozzle at a desired positioning order to fit your specific
conditions.
- After use, it is necessary to take off the nozzle and tighten the cap.
- Three Bond 1207C left in the nozzle can be removed very easily after curing.
- As the products tend to react with moisture in the air, please be sure to
squeeze the air out of the container before tightening the cap.

Gambar produk