Detail STM32F103C8T6 Arm STM32 STM 32 Minimum system minsys module module
Informasi produk: Board ini menggunakan STMT6 sebagai core nya.
MCU dengan 8M crystal dan rangkaian power supply USB I/O port terletak di kiri dan kanan board ini. Menggunakan SWD simulation debug interface. Menggunakan Micro USB port untuk komunikasi dan sumber tegangan. RTC crystal merk Epson lebih stabil. Chip STMT6:
Package Type: LQFP; Jumlah pin: 48; Kernel: Cortex-M3; Operating frequency: 72MHz; Storage resources: 64K Byte Flash, 20KByte SRAM; Interface Resources: 2x SPI, 3x USART, 2x I2C, 1x CAN, 37x I / O ports, Analog-to-digital conversion: 2x ADC (12-bit / 16-channel) Timers: 3 general timers and 1 advanced timer Debug Download: Support JTAG / SWD debug interface to download, support for IAP
Chip RT9193: 3.3V regulator chip, the maximum output of 300mA.
Interface description: 1, SWD interface: support for simulation, download and debug. 2, Mirco USB interface: power supply and USB communication, does not support the download. 3, USART1 interface: USART1 can be used to download the program, or use the USART1 for communication. 4, MCU pin interface: leads all I / O port pins, easy to connect with peripherals. 5, 5V and 3.3V power input and output interface: commonly used in external power supply, or with other modules for common ground treatment Other Device Description: 1, Power LED (PWR): Power indicator status, can determine whether the power supply is stable. 2, the user LED (PC13): to facilitate the I / O output test or indicate the program running. 3, start jumping choose programming mode: (1, the user flash memory 2, SRAM 3, system memory). 4, reset button: reset chip for the user program. 5, 8M Crystal: The frequency can be set to make the system clocked at 72MHz. 6,32.768KHz Crystal: Available for built-in RTC, or for calibration.
Sebagian penjelasan tidak diterjemahkan karena lebih mudah dimengerti dalam bahasa Inggris.