Stiker Lampu Rem Tinggi Bahan Serat Karbon Warna Hitam Untuk Mitsubishi Lancer Ex

Detail Stiker Lampu Rem Tinggi Bahan Serat Karbon Warna Hitam Untuk Mitsubishi Lancer Ex

Model: Brake light stickers
Material: 3d stereo stickers
Type of film: Body stickers
Description of installlation
- Simulation installlation
Adjust the product to the correct position in the vehicle.
- Surface treatment
1.) Cleaning
Wash the body with a towel or water in the parts you need to installl.
2.) Points to note
Keep the body dry before installlation without dust, oil, wax, temperature below 10 degrees must warm the body and product with 3m glue.
3.) Use of adhesives
Use a cotton swab or paper towel (small amount) in the place where the glue is to be affixed) Wipe the position where the glue is to be affixed (body body))
4.) Installlation
Tear the 3m protective film off the back of the product and leave the film outside to match the installlation position, then slowly tear the film down press.
5) Security period
No contact with water, oil, dust within 48 hours after installlation.
Notes: Please be right before installlation, back glue red film tear off and refuse to return

Gambar produk