Stiker Lampu Rem Tinggi Bahan Serat Karbon Warna Hitam Untuk Ford Ecosport 2012-2014

Detail Stiker Lampu Rem Tinggi Bahan Serat Karbon Warna Hitam Untuk Ford Ecosport 2012-2014

Model: Brake Light Stickers

Material: 3d stereo stickers

Film Type: Body Stickers

Installation Description

- Simulation installation

Adjust the product to the correct position in the vehicle.
- Surface treatment
1.) Cleaning
Wash the body with a towel or water on the parts you need to install the ll.
2.) Points to get grade
Keep the body dry before installation without dust, oil, wax, temperature below 10 degrees should heat the body and the product with glue 3m.
3.) Use of stickers
Use a cotton swab or paper towel (small amount) where the glue is attached) Clean the position where the glue is attached (body)
4.) Installation
Tear off the 3m protective film, peel off the back of the product and leave the outer film to match the installation position, then slowly press the film down.
5) safety period
No contact with water, oil, dust within 48 hours after installation.
Notes: Please be sure before installing, tear red film back glue and reuse to return

Gambar produk