Detail STARTRC 6 in 1 GaN 120W Intelligent Charger DJI Mavic Mini 3 Pro / 3
Specifications: The charger was designed for DJI Mavic Mini 3 Pro / Mini 3 specially. It allows to charge drone, remote controller and mobile phone at the same time. The charger is made of GaN (gallium nitride)third generation semiconductor material,and features high voltage, high frequency and stable performance. Compare to other same power chargers, the charger is smaller and lighter. 1,Charging ambient temperature: 7-40℃ 2,AC port input: AC 100V-240V 50/60HZ, 1.5A MAX 3,Output 1: DC output 13.2V/2A*4 4,Output 2: USB output 5V/2.1A*2
Features: 1. The charger has overvoltage, overcurrent, overheat, overcharge balance and other protection functions 2. Full charge mode and maintenance charge mode are available. Full charge mode: when the battery is fully charged, 100% power, it will be ready to use. Maintenance charge mode: Charge low power battery to 60% for long-term storage. If the battery is stored with full power, it will be easy to bulge, which may lead to battery failure. 3. Features high voltage, high frequency and stable performance 4. Smaller size and lighter design 5. Four batteries can be charged at the same time without waiting to charge one by one 6. One-button power switch design. Allows to turn off the main switch directly during charging or after full charge, but no need to remove the power cord
Notes: 1. When charging, please place the charger stably and do not cover it with other items to ensure the normal heat dissipation of the charger. 2. When the ambient temperature is lower than 7 ° C, the battery overcurrent protection may occur due to the high current of the charger. 3. Do not charge batteries with damaged surfaces to avoid battery short circuit or fire. 4. Indoor use only, do not expose to rain or snow. 5. The charging mode will be locked and cannot be adjusted during charging. 6. Do not disassemble or assemble the charger without permission.