CATATAN TOKO : - Konfirmasi Stok Barang Terlebih Dahulu (Via chat). - Penukaran Barang / Salah Kirim barang : WAJIB Video Unboxing Paket saat diterima sampai tujuan. - TIDAK menerima komplain tanpa Video Unboxing Paket. - Membeli berarti menyetujui ketentuan Toko. Terima kasih.
DESCRIPTION HyperX HX426C16FW2/8 is a 1G x 64-bit (8GB) DDR4-3200 CL16 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 1G x 8-bit FBGA components per module. Each module kit supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. Each module has been tested to run at DDR4-2666 at a low latency timing of 16-18-18 at 1.2V. Additional timing parameters are shown in the Plug-N-Play (PnP) Timing Parameters section below. The JEDEC standard electrical and mechanical specifications are as follows: JEDEC/XMP TIMING PARAMETERS • JEDEC/PnP: DDR4-2666 CL16-18-18 @1.2V • XMP Profile -1: DDR4-2666 CL16-18-18 @1.2V
FEATURES • Power Supply: VDD = 1.2V Typical • VDDQ = 1.2V Typical • VPP = 2.5V Typical • VDDSPD = 2.2V to 3.6V • Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals • Low-power auto self refresh (LPASR) • Data bus inversion (DBI) for data bus • On-die VREFDQ generation and calibration • Single-rank • On-board I2 serial presence-detect (SPD) EEPROM • 16 internal banks; 4 groups of 4 banks each • Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS) • Selectable BC4 or BL8 on-the-fly (OTF) • Fly-by topology • Terminated control command and address bus • Height 1.340” (34.04mm), w/heatsink