Perfin PF32JT Iron Setrika Uap Elektrik Handheld Garment Steamer 1200W

Detail Perfin PF32JT Iron Setrika Uap Elektrik Handheld Garment Steamer 1200W

Fitur:

Setrika yang ringkas: Setrika ini mengadopsi inti pemanas inovatif untuk meningkatkan tingkat penguapan. Saluran isolasi bertekanan memungkinkan transmisi uap yang stabil. Jumlah uapnya besar dan halus.

Banyak kegunaan: Setrika ini dapat digunakan untuk menghaluskan pakaian yang menghilangkan kerutan dengan cepat. Cocok untuk kemeja, rok, jas, celana panjang, dll.

Satu operasi kunci: Desain on-off satu tombol pada setrika ini memudahkan untuk menyetrika pakaian.

Panel baja tahan karat yang besar: Mesin setrika memiliki panel stainless steel yang besar, yang halus dan tidak merusak pakaian.

Uap yang kuat: Setrika menyemprotkan uap yang kuat di bawah suhu dan tekanan tinggi, yang menembus dalam-dalam dan dengan mudah menyetrika pakaian selama empat musim.


Spesifikasi:

Nilai catu daya: 220V-50HZ

Nilai daya yang dinilai: 1000W

Aliran uap: 18g / menit

Kapasitas tangki air: 100ml

Ukuran: 150 * 170 * 75mm


Termasuk ：

1 * Mesin Setrika Gantung Genggam



Nama Merek: Perfin
Model produk: PFJT01
Rated power: 400W
Rated voltage: 200V
Control method: 3-speed temperature control
Rated frequency: 50HZ
Ironing function: dry ironing
color: White
The correct use of steam iron:
1. The yellow and green two-color wires in the power core wire should be grounded before use to prevent the risk of electric shock in case of electricity leakage.
2. Raise the front end so that the water inlet is upward, and the measuring cup will slowly fill the boiling water from the water inlet. The amount of water to be added depends on the volume of the iron reservoir.
3． For an electric iron equipped with a water level glass, the iron can be erected, observe the water level in the water reservoir, and add water as required.
4． The name of the fabric on the steam iron's fabric sign is basically the same as that of the tempered iron. The difference is an additional "steam" mark.
5. Turn on the iron and turn the temperature control knob to the position between "Wool" and "Linen". The indicator light should glow. When the light goes out, the soleplate temperature has reached the required value.
If water has been added to the iron, steam should "spray" to iron.
6. Dry ironing can be done with a steam iron. The method is to adjust the temperature according to the type of fabric being ironed.
Control knob to select the proper base plate temperature. After that, adjust the steam knob to the "0" position.
7. After use, the remaining water in the water reservoir should be poured out from the water supply port. When pouring, the front end of the iron should be downward, and the electric trading bucket should be shaken at the same time. Then turn the temperature knob to the highest temperature range, and power on for a few minutes to evaporate all the internal moisture. Then cut off the power, turn the temperature control knob back to the lowest temperature range, and store it after it has cooled down naturally.

Gambar produk