Online Digital PH Meter & Salinity Monitor Meter 2 in 1 PH-0259

Detail Online Digital PH Meter & Salinity Monitor Meter 2 in 1 PH-0259

2 in 1 Online PH & Salinity Monitor
1.PH-0259 monitor is ideal for seawater, horticultural and hydroponics applications where pH and Salinity levels need.
2.to be continuously monitored for optimal plant growth.
3.The continuously monitor and display the pH and Salinity values of a solution on an easy to read in one LCD's. It is compact and easy to install and use.
4.This makes them ideal for all continuous monitoring applications.

Specifications:
Measure Range
PH 0.00 ~ 14.00 pH
Salinity
Resolution
PH 0.01 pH
Salinity 0.1 ppt
Accuracy
PH 0.1 PH
Salinity 2%F.S
Operating Temperature 0 50
Temperature Compensation 0 50
Power Supply DC6V
Dimension 88mm 55mm 22 mm
Weight 135g

1. Connect the pH electrode to the meter. Remove the protective cap.
2. Connect the power adaptor to the meter and to the mains;or press the button(which is at the bottom of meter) to open the self-locking switch.
3. Turn the meter on by pressing the 'ON/OFF' key.
4. Immerse the electrodes in the solution to be tested. Stir gently and wait for the reading to stabilize.
5. After use, turn off the meter. Rinse the electrode with water to minimize contamination. Replace the protective cap.

NOTE:
1.When turn on the meter, the back-lit LCD is bright, it will be
kept about one minute then it automatic extinguish slowly. if
you need the back-lit LCD light, please press the 'LIGHT' key.
2.Please use this monitor away from electronic ballast.

How to do Salinity Calibration?
1)Immerse the electrode into the distilled water and activate it about five miniuts.
2)Immerse the electrode in the calibration solution(35ppt at 25 ),gently shake it and wait for a stable display. Regulate the trimmer with the screwdriver provided until display shows "35" at buffer solution temperature of 25 C.
3)Rinse the electrode with distilled water, and dry it with filter paper.

Gambar produk