NOYAFA NF-810 Kabel Lan Tester Network & Wire Tracker Network Line scanning power cable Scanning
Merek: NOYAFA | Lihat selengkapnya produk Komputer & Aksesoris dari NOYAFADeskripsi singkat
Komputer & Aksesoris > Komponen Network > Kabel Network & Konektor > NOYAFA NF-810 Kabel Lan Tester Network & Wire Tracker Network Line scanning power cable Scanning
- Pengiriman Ekspres
- Barang yang diperiksa
- Bayar di tempat berlaku
- Kualitas, Prestise
- Pengembalian produk
- Dukung pembuatan faktur
Produk Terkait
Detail NOYAFA NF-810 Kabel Lan Tester Network & Wire Tracker Network Line scanning power cable Scanning
Video perkenalan produk NOYAFA NF-810 Kabel Lan Tester Network & Wire Tracker Network Line scanning power cable Scanning. Sumber: Shopee.
Rotate the transmitter knob switch to the "SCAN", scan indicator is always on, indicating that the cable scanning function has been entered. After selecting the function, connect one end of the network cable/telephone cable to be tested to the RJ45/RJ11 port of the transmitter
Receiver
Turn on the receiver knob switch, you can adjust the receiver knob switch to the maximum sensitivity, use the receiver probe to approach the cable, when the receiver receives a signal, the receiver emits a "dididi" sound, the stronger the signal, the yellow-green signal The brighter the indicator light flashes, you can quickly locate the approximate position of the cable in this way.
After determining the approximate position of the cable, appropriately reduce the receiver's signal sensitivity to accurately locate the target line.
Earphone Function
When the receiver is tested in a noisy environment, you can wear headphones for operation to avoid external interference.
POE Switch Test FunctionThe RJ45 of the receiver is connected to the POE switch with a normal network cable, and the power supply connection of the POE switch can be tested.
Features & details
๐๐ป[Multi Function Testing Mode]It supports to open, short, cross of lan cable, included STP cable.
๐๐ป[Cable scanning function]Cable tester can looking for RJ11/RJ15/Electronic cables๏ผthrough the sound of the receiver and the yellow-green signal indicator, the target line position can be accurately located.
๐๐ป[Wiremap function]The wiremap function is mainly used to detect the wire sequence, short circuit, open circuit, and cross of the network cable, and display the test results in the form of wire sequence lights.
๐๐ป[Telephone line status detection]It can test the polarity and on-off of the telephone line, and can also detect the state of the telephone line, such as idle, ringing, and conversation.
๐๐ป[PoE Switch Testing]The RJ45 of the receiver is connected to the POE switch with a normal network cable, and the power supply connection of the POE switch can be tested.
Gambar produk
