INDOCART Tinta Resin 3D printer Phrozen Nylon Green Tough Resin-500g

Detail INDOCART Tinta Resin 3D printer Phrozen Nylon Green Tough Resin-500g

INDOCART Tinta Resin 3D printer Phrozen Nylon Green Tough Resin-500g

Kode Produk : V-RSN-PHZNYLON

Phrozen Nylon-Green Tough 3D Printer Resins are stretchable, withstanding high pressures up to 19 MPa, and do not break easily. These resins are specifically made for prototyping and creating functional 3d printed parts.

Specifications
Viscosity: 742 cps
Proportion: 1.1
Tg: 73 C
Elongation: 130%
Break Value: 19 MPa
Hardness: Shore 68 D
I-Zod Impact: 23.79 KJ/m2
XY Resolution: 0.047 mm
Layer Height / Parameter: 10 sec @ 50 um, Delay 3
Ways to Rinse: Use alcohol spray to clean models and dry it by an air gun. Do not immerse printed part into alcohol over 30 sec.
Compatible Printer: Phrozen 3D Printer Series
Application: Prototyping

Precautions
Way to Rinse: Clean with alcohol spray with air gun. DO NOT immerse model into alcohol for long time.
Use and preserve resins in room temperature, and in dark and ventilated conditions
Shake well before each use
After printing, please keep used resins in a closed & opaque bottle. Avoid mixing used resin with a new resin.
Keep resin away from kids and away from direct sunlight exposure
Wear gloves and masks during operation of resins. Wash with plenty of water if you get direct skin contact or eye contact with resins.
DO NOT dump resin. Please cure it and treat it as general plastic garbage.
After receiving your Phrozen resins, we strongly recommend you finish it as soon as possible as unopened resins only have a shelf life of one year

Pastikan anda mendapatkan kualitas terbaik hanya di IndoCart.

Gambar produk