In Stock SCULPFUN S30 Pro 10W Modul Laser Lensa Yang Dapat Diganti Built-in Air Assist Clean Cutting Untuk DIY Printer 3D Kompatibel Dengan SCULPFUN S9 /S6pro/S6 ATOMSTACK A5/A5Pro ORTUR(1

Detail In Stock SCULPFUN S30 Pro 10W Modul Laser Lensa Yang Dapat Diganti Built-in Air Assist Clean Cutting Untuk DIY Printer 3D Kompatibel Dengan SCULPFUN S9 /S6pro/S6 ATOMSTACK A5/A5Pro ORTUR(1

Features:
🔝 Wide Compatibility: With an ingenious and highly compatible structural connection device, S30PRO module can be well adapted to different laser engraving machines, laser cutting machines, DIY 3D printers, CNC milling machines, etc. Compatible with SCULPFUN S9/S6pro/S6, ATOMSTACK A5/A5Pro, ORTUR (12V version) laser engraving machine.
🔝 Ultra-fine and high-density 10W laser shaping technology: The laser power of S30 Pro is increased to 10W, which is twice that of S9. But getting the same 0.08mm focus ultra-fine laser beam as the S9 means that the S30 Pro has higher energy density, stronger cutting penetration and engraving capabilities.
🔝 Powerful High-Speed Air Assist: S30 Pro is equipped with an advanced high-pressure air-assisted metal nozzle, which can generate high-pressure airflow under the air pump, greatly improving the cutting efficiency, and the cutting speed is more than 5 times faster than that without air assistance. 
🔝 Detachable laser eye shield: Equipped with a detachable eye shield, which will not dazzle even without glasses. Also, if you don't need it, you can easily disassemble it.
🔝 Stronger&Cleaner: Combining advanced high-speed air assist and 10W high-energy density laser, many high-density woods such as can be cut; And the cutting surface is cleaner with powerful airflow blows away the residue, free of any stains.
🔝 Universal 12V/PWM modulation board: It uses a common 12V/PWM modulation board, which can be adapted to common GRBL or CNC motherboards. See product pictures for details.
Specification:
Module: SCULPFUN S30 Pro Laser module Set
For: laser engraving machines such as SCULPFUN S9/S6pro/S6、ATOMSTACK A5/A5Pro、ORTUR(12V Version), ELEKSMAKER, or DIY 3D printers, CNC machine tools. 
Engraving Materials:  all kinds of wood (including walnut, cherry and other high-density wood), MDF, zigzag, cardboard, plastic, leather, PCB board, oxide, 304 stainless steel, ceramic, dark stone
Cutting Materials:  all kinds of wood (including walnut, cherry and other high-density wood), MDF, acrylic board, cardboard, non-woven, bamboo, leather, some plastic boards, PCB boards
Laser Output Power: 10W (light energy)
Inner diameter of Air Pipe: 7.5mm (recommended to use 30L/min, 0.03Mpa air compressor, out diameter of nozzle:8mm)
Laser Wavelength: 455±5nm
Laser Type and Fixed Focus: fixed focus laser, fixed focus through 50mm measuring column
Laser Shell Material: alloy
Laser circuit board 
Circuit Board Size: 40*40mm
Circuit Board:12V/PWM modulation board
Input voltage: 12V
Max Input of laser module:12V 5A
Wire Rod:HY2.0, 3Pin terminal (3-core cable, A: PWM +, B: GND, C: VCC ).
Fan:12V 0.15A 4020 fan
Fan speed: 15000 rpm
Operating temperature: -20 ℃ to 70 ℃
Package Weight: 0.6kg/21.1oz
Package Size: 305x150x125mm/12x5.9x4.9in
Note: 
How to judge whether the S30 Pro laser is suitable for use? You need to pay attention that the input voltage of the S30 Pro laser is 12V, and the S30 Pro is a 3pin in

Gambar produk