HUTT Ddc55 Electric Window Cleaner Robot 120W 3800pa Suction

Detail HUTT Ddc55 Electric Window Cleaner Robot 120W 3800pa Suction

HUTT DDC55 Window Cleaning Robot Main Features

*Garansi7 Hari
* High quality. safer. More peace of mind.
* Upgraded quality and carefully selected components.
* Variable frequency suction, innovative algorithm.
* True deep cleaning technology.
* AI intelligent detection obstacles.
* Careful noise reduction design.

Product Parameters:

Model: Hutt ddc55

Length, width and height: 290mmx135mmx85mm
Charging time: 2.2h
Battery capacity: 650mah
Noise: about 65dB
Wiping speed: 3min / ㎡
Rated power: 120W
Rated voltage: 24V
Common problem:

-Can high-rise glass be used?

The main use scenario of this product is the high-rise external glass, with a clean coverage rate of 99%. The safety rope can avoid the risk of falling.

-How to use the glass cleaner and more efficient?

It is the most convenient and efficient way to wet the dishcloth with tap water and screw it to dry as much as possible, and then directly cover it on the machine. If there is obvious particle dirt on the surface of the glass, you can wipe the dust off the surface with a dry cloth first, and then clean it with a wet cloth. Normally, you can clean it very well by wiping it twice. If there are stubborn stains, you can use the original cleaning tablet to mix with water and then fill it in the spray pot, and then spray it on the stains and wipe it off.

-Do cleaning rings need to be removed every time they are installed?

The detachable cleaning ring is designed for the convenience of novice users. After skilled use, it can be used without detaching the direct cloth.

-How to install the cleaning ring after removal?

The clasps of the cleaning ring and the turntable at the bottom of the fuselage are all provided with prompt stickers for alignment. Press in the clasps after alignment according to the prompt stickers, and observe that the cleaning disk and the bottom of the fuselage are completely horizontal from all angles, which means that they are installed in place. If the clasp is tight during the process

Gambar produk