Detail HSAirpo XPW302 300Mbps Router Fiber Optik Wireless 2 Port Gigabit XPON ONU 2 Antena HS Airpo XPW302 N1
Xpon - Epon bisa Gpon bisa, tanpa ribet ganti2 ONU Support Epon = Huawei,ZTE, Hioso, BT-pon, Hsairpo Support Gpon = Huawei, Zte, Bt-pon, Hsairpo
Specifications Technical Item Details PON interface 1 G/EPON port(EPON PX20+ and GPON Class B+) Upstream: 1310nm; Downstream: 1490nm SC/UPC connector Receiving sensitivity: ≤-27dBm Transmitting optical power: 0~+4dBm Transmission distance: 20KM LAN interface 1x10/100/1000Mbps and 1x10/100Mbps auto adaptive Ethernet interfaces. Full/Half, RJ45 connector WIFI Interface Compliant with IEEE802.11b/g/n Operating frequency: 2.400-2.4835GHz support MIMO, rate up to 300Mbps 2T2R,2 external antenna 5dBi Support: Multiple SSID Channel:13 Modulation type: DSSS?CCK and OFDM Encoding scheme: BPSK?QPSK?16QAM and 64QAM
Panel lights and Introduction Pilot Lamp Status Description WIFI On The WIFI interface is up. Blink The WIFI interface is sending or/and receiving data (ACT). Off The WIFI interface is down. WPS Blink The WIFI interface is securely establishing a connection. Off The WIFI interface does not establish a secure connection. PWR On The device is powered up. Off The device is powered down. LOS Blink The device doses not receive optical signals or with low signals. Off The device has received optical signal. PON On The device has registered to the PON system. Blink The device is registering the PON system. Off The device registration is incorrect. LAN1~LAN2 On Port (LANx) is connected properly (LINK). Blink Port (LANx) is sending or/and receiving data (ACT)