HS AIRPO CM3F2E POE SUPPORT MEDIA CONVERTER 3 FIBER 2 ETH

Detail HS AIRPO CM3F2E POE SUPPORT MEDIA CONVERTER 3 FIBER 2 ETH

HS-CM3F2E-PoE is a 10/100Mbps adaptive fiber switch. It has 2 10/100Mbps Ethernet ports and Mbps fiber ports. It can extend the transmission distance from 100m to 120km via copper cables. There are also many other advantages such as isolation protection, good data security, working stability and easy maintenance.
- POE Support 5 12v
- 3 Fiber (AAB) 2 Ethernet
- Support the switch between 100Base-FX and 100Base-TX
- 3*155Mbps full duplex fiber ports, 2*10/100M adaptive Ethernet ports
- Support 10/100M rate, support MDI/MDI-X adaptive, support full/half duplex adaptive
- Each port has the complete LED Indicator light for installation,commissioning and maintenance
- Support single mode single fiber,single mode dual fiber ,multi-mode dual fiber and SFP slot
- Support IEEE802.1d Spanning tree
- Support IEEE802.1p traffic prioritization protocol
- Support high performance Qos function on each port
- Support broadcast storm protection
- Support max forwarding packet length 2048 bytes option
- Support IEEE 802.3x flow control and back pressure control

Standards :
IEEE802.3u 100 Base-T
IEEE802.3u 100 Base-TX/FX
IEEE802.3x Flow control
IEEE802.1q VLAN
IEEE802.p QoS
IEEE802.3d Spanning Tree
Certifications CCC, CE, FCC, RoHS
Ethernet Port
- Connector: RJ45
- Data Rate: 10/100M
- Distance: 100m
- UTP Type: UTP-5E or higher level
Fiber Port
- Connector: SC/FC/ST slot
- Data Rate: 155Mbps
- Optical wavelength: 850nm/1310nm/1490nm/1550nm
- Distance: 550m~120km
- Fiber(Single mode): 8/125,8.7/125,9/125,10/125
Performance
- Processing Type: direct forwarding
- MAC Table Size: 2K
- Buffer Space: 2048 bit
- Back bandwidth: 1G
- Maximum Packet Length:
Power
- Input Voltage: AC100V~240V 50/60Hz
- Connector: DC S

Gambar produk