eSUN Hard Tough Resin 0.5 Liter Bottle for DLP 3D Printer

Detail eSUN Hard Tough Resin 0.5 Liter Bottle for DLP 3D Printer

3D Zaiku Indonesia

eSUN Hard Tough Resin 0.5 Liter Bottle

Isi 0.5 liter per botol


3D Zaiku Indonesia adalah Distributor Tunggal/Satu-satunya eSUN Filament untuk Indonesia



Cocok untuk print bahan yang butuh kekuatan lebih, seperti part-part otomotif, alat kedokteran, part drones, dan alat elektronik


This is a resin with high physical strength, high hardness and high toughness similar to ABS filament. Experiments have shown that the 3D model produced by eSUN's Hard-Tough Resin product, such as the carrier gear, can withstand high impact forces and other high-strength mechanical pressures. While using electric drills to test the toughness of the resin, there's no breakage on the model even after a few drills. For the application field, the material needs to have extremely high stress and strain performance, and that's why eSUN developed Hard-Tough Resin.
Hard-Tough Resin is a urethane acrylate photocurable resin suitable for LCD printers. To ensure the good quality and stability, eSUN is fully formulated with high quality imported raw materials with the following advantages:
1. High impact strength;
2. Higher shock resistance than normal resin;
3. Rigid resin, excellent mechanical properties such as hardness, tensile and bending;
4. High surface hardness and wear resistance.


Print setting

Applicable wavelength: 395-405nm
Operating temperature: 18-35 ° C
Exposure time: 20-30s on the bottom layer, 8s on the normal layer
Pls adjust the setting until you get the best print performance.



Warna :
- Blue
- Black
- Grey
- White


Isi 0.5 Liter



Jenis :
For LCD 3D Printer (Photon, Creality, Anet, Sparkmaker, Phrozen, Peopoly, dll)




Bisa dipakai untuk Flashforge Hunter dan juga Anycubic Photon
Resin premium hasil print lebih bagus

Ready Stock

Gambar produk