Detail ESP32 ESP-32 DEVKITC V4 WROOM-32D WIFI BLUETOOTH PLUS KABEL MICRO USB
ESP-0048 ========
Deskripsi: ================================= ESP32-DevKitC V4 adalah pengembangan kecil yang basicnya berdasarkan ESP32 dengan Espressif. Sebagian besar pin modul di papan telah led. kita dapat dengan mudah menghubungkan beberapa perangkat periferal melalui jumper sesuai dengan kebutuhan aktual, atau mengembangkan dengan menggunakan breadboard
Feature: ================================= EN: raffle reset. Boot: Download button. Press and hold the Boot button and press the EN button (don't release the Boot button at this time) to enter the "firmware download" mode and download the firmware via the serial port USB to UART Bridge | single-chip USB-UART bridge that can provide transfers up to 3 Mbps. : Micro USB port USB interface: It can be used as the power supply of the circuit board, or the communication interface between the PC and the ESP32-WROOM-32 module. 5V Power LED: when the Development Board is powered (USB or external 5V), this indicator will light up. I/O: most of the module pins on the board have been led to the development board header. Users can program ESP32 to realize various functions such as PWM, ADC, DAC, I2C, I2S, SPI and so on. Annotation Pins D0, D1, D2, D3, CMD and CLK are used for communication between the ESP32 chip and the SPI flash, and are concentrated on the two sides of the development board near the USB port. In general, this pin cannot be connected, otherwise it may affect the operation of the SPI flash / SPI RAM. The GPIO16 and GPIO17 pins only apply to onboard ESP32-WROOM series and ESP32-SOLO-1 development boards provided for internal use.
Power options The development board can choose one of three power supply modes: USB mikro power supply (default) 5V / GND pin power supply 3V3 / GND pin power supply
Feature:
=================== 1 x ESP32 ESP-32 DEVKITC V4 WROOM-32D WIFI BLUETOOTH PLUS KABEL MICRO USB