Audio Technica AT VM95E Cartridge Turntable Audio Technica LP120

Detail Audio Technica AT VM95E Cartridge Turntable Audio Technica LP120

Isi Dalam Kemasan :
1x AT-VM95E

This VM95 Series cartridge with 0.3 x 0.7 mil elliptical stylus fits half-inch mount turntables. The cartridges special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.

Feature:
- VM95 Series dual magnet cartridge with 0.3 x 0.7 mil elliptical stylus
- Aluminum cantilever
- Specially wound coils increase output voltage
- Durable low-resonance polymer housing
- Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws no nuts required
- Compatible with any AT-VMN95 replacement stylus

Cartridge & Stylus
Frequency Response: 20-22,000 Hz
Channel Separation: 20 (dB at 1 kHz)
Vertical Tracking Angle: 23
Vertical Tracking Force: 1.8-2.2 g (2.0 g standard)
Stylus Construction Bonded round shank
Recommended Load Impedance: 47,000 ohms
Coil Impedance: 3.3 k ohms (1 kHz)
DC Resistance: 485 ohms
Coil Inductance: 550 mH (1 kHz)
Output Voltage: 4.0 mV (1 kHz, 5 cm/sec.)
Output Channel Balance 2.0 dB (1 kHz)
Stylus Shape: 0.3 x 0.7 mil elliptical
Cantilever: Aluminum pipe
Static Compliance: 17 x 10 6 cm / dyne
Dynamic Compliance: 7 x 10 6 cm / dyne (100 Hz)
Mounting Half-inch
Cartridge Weight: 6.1g
Dimensions: 17.2 mm (0.68") H 18.9 mm (0.74") W 28.3 mm (1.20")

Gambar produk