Analog PH Probe Sensor Shield and PH value

Detail Analog PH Probe Sensor Shield and PH value

INTRODUCTION
Need to measure water quality and other parameters but havent got any low cost pH meter? Find it difficult to use with Arduino? Our analog pH meter, specially designed for Arduino controllers and has convenient and practical connector and a bunch of features. Instant connection to your probe an your Arduino to get pH measurements at 0.1pH (25 ). For most hobbyist this great accuracy range and its low cost makes this a great tool for biorobotics and other projects! It has an LED which works as the Power Indicator, a BNC connector and PH2.0 sensor interface. To use it, just connect the pH sensor with BND connector, and plug the PH2.0 interface into the analog input port of any Arduino controller. If pre-programmed, you will get the pH value easily. Comes in compact plastic box with foams for better mobile storage.
Build your own PH meter gadjet, or a water monitoring station for your water tanks. This and our other water sensor devices could make for the ultimate water control device. Use it for your aquaponics or fish tanks or other materials that need measurements.

APPLICATIONS
Water quality testing
Aquaculture

SPECIFICATION
Module Power : 5.00V
Module Size : 43 x 32mm
Measuring Range :0 14PH
Measuring Temperature: 0 60
Accuracy : 0.1pH (25 )
Response Time : 1min
pH Sensor with BNC Connector
pH2.0 Interface ( 3 foot patch )
Gain Adjustment Potentiometer
Power Indicator LED

DOCUMENTS
Wiki Doc dfrobot*com/wiki/index.php/PH_meter(SKU:_SEN0161)
PH composite electrode manual dfrobot*com/image/data/SEN0161/PH%20composite%20electrode%20manual.pdf
Arduino sample code dfrobot*com/image/data/SEN0161/phMeterSample•zip

SHIPPING LIST
pH probe (BNC connector) x1
pH sensor circuit board x1
Analog cable x1

Gambar produk