Instructions : 1. Press the “ON/UNIT/OFF” button. Wait for “0.0” PSI or “0.00” Bar or “0.00” kgf/ c㎡ or “0”Kpa display and bleep sound. 2. Place the nozzle of the gauge over the tire valve. Press firmly to ensure good seal and prevent air escaping. 3. Hold gauge on the valve until the reading on the LCD display locks. 4. Remove the gauge quickly from the valve and read pressure. 5. To retake the reading simply place the nozzle over the tire valve again and repeat. 6. Gauge will automatically shut off 20 or 60 seconds after use. Gauge can be manually turned off by holding the “ON” button down for more than 3 seconds