220V 2000W Electric Heat Gun Air Mesin Pemanas Pistol Angin Panas Tools

Detail 220V 2000W Electric Heat Gun Air Mesin Pemanas Pistol Angin Panas Tools

Features:
1. Rapid heating: Double heating wire, rapid heating, only a few seconds to heat up, the temperature is stable, with overload protection function.
2. Electroplated steel pipe: The middle of the steel pipe and the shell is designed with a separate heat-insulating grille-type air outlet, and the air supply is uniform and powerful.
3. High power: 2000W high power, pure copper motor, continuous work, even running temperature, longer service life.
4. Adjustable wind speed: Two-speed wind speed adjustment switch, which can be adjusted according to the needs of use.
5. Wide range of applications: It can be used for car filming, thawing, photo lamination, packaging shrinkage, etc., all in one machine.

Specification:
Product Name: Hot Air Pistol
Color: Black
Material: Copper
Size: About 23*18 cm/9.06*7.09 inch (L*W)
Plug: EU, Chinese standard
Plug Specifications: European Regulation
Air output: 240-420L/min
Noise: 50-60 decibels
Working temperature: 50°C~550°C
Power Type: AC Power
Working current: 6.3A
Rated voltage: 220V-240V
Rated input power: 2000W

The package includes:
1Pc x Hot Air Pistol

Precautions for safe operation
1. Connect to the power supply according to the service voltage marked on the tool
2. When using tools at high places, always hold them tightly
3. Do not place the tool before it stops running completely
Hot air pistol safety precautions
1. Do not use a hot air pistol as a hair dryer
2. Do not directly point the fan at people or animals
3. Do not use near flammable materials or gas
4. Do not block or cover the air inlet and outlet
5. Do not touch the nozzle when the hot air pistol is in use or just after use. The handle of the heat hot air pistol must be kept dry
6. The heat hot air pistol can be stored only after it is completely cooled

Maintenance and repair
1. Do not clean with turpentine, paint mixture, gasoline or the same
2. When stopping operation, stand the fan upside down on a flat working surface and wait for cooling
3. When storing the hot air duct, ensure that the hot air duct is completely cooled
4. Often remove the booty accumulated in the air inlet of the heat fan, and keep the air inlet and outlet clean
5. Check the extended power cable periodically. If it is damaged, replace it immediately
6. All maintenance shall be conducted by authorized service centers or other qualified service organizations to ensure safety

Note:
1. Due to the light and screen difference, the item's color may be slightly different from the pictures.
2. Please allow 0.5-2 cm differences due to manual measurement.

Gambar produk