1 Set Alat Penarik Penyok Mobil Universal Bahan Plastik Dengan Suction Cup
1 Set Alat Penarik Penyok Mobil Universal Bahan Plastik Dengan Suction Cup
Deskripsi singkat
Otomotif > Perkakas & Perlengkapan Kendaraan > Perkakas & Perlengkapan Kendaraan Lainnya > 1 Set Alat Penarik Penyok Mobil Universal Bahan Plastik Dengan Suction Cup
Detail 1 Set Alat Penarik Penyok Mobil Universal Bahan Plastik Dengan Suction Cup
Welcome Our Online Store
1,What our aiming at? ★ Perfect product: popular & practical & inexpensive. ★ Fast delivery: ready stock & 1 day shipped out. 2,Better consumer protection ★ Full refund if you don't receive your order. ★ Full or partial refund , if the item is not as described.
Product description: [1Set Universal Car Dent Puller] [Plastic Suction Cup For Auto Remove Dents]
100% brand new and high quality. It is made of aluminum alloy with high strength and durability. Used as an adapter for sliding hammers or pulling faucets for easy grasping and pulling. The necessary components for dent repair, directly replace the damaged components. It is easy to install, the thread size is M10, and the application is better.
Specification: Material: Aluminum alloy + ABS Type: M10 Size: T-shaped puller about 9.5*12cm How to use this paint-free dent repair kit: 1. Clean the dent with a clean damp cloth; 2. Put the glue stick (not included) into the glue gun, pull the trigger to let the glue stick into the glue gun, turn on the power and preheat for 5 minutes; 3. Use suitable brushed gaskets. Large dents require a large tensile washer. (Note: the larger The larger the tension washer, the greater the tension); 4. Pull the trigger and coat the wire drawing gasket with extrusion glue (4 holes of the gasket should be coated with hot melt glue); 5. Quickly place the brushed gasket coated with hot melt glue in the center of the dent, press gently until the glue is solidified and adhered (let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes, in winter); 6. Align the T-type repairer, press the wire drawing gasket with hot melt glue, and pull the slide bar backward to pull up the dent; 7. Check the circuit board. If the dent still exists, tap it lightly with a flattened hammer or pen; 8. Clean the repaired area with a clean damp cloth.
Package Included: 1 piece x T-shaped puller 18 pcs x blue gasket
★ Free gifts: Any separate one package will have a randomly Gifts in it ,Hope you will like it! ★ Note:due to the light and screen difference, the item's color may be slightly different from the pictures. please understand and please allow some differences due to manual measurement. ★ Dear friend:you may find that someone sells at a lower price than us but they cannot guarantee the same quality and service as we do,Please Believe us And Follow our store.thank you so much!